Tag: Skookum Logger

Monthly QRP Outing

Monthly QRP Outing

Every month the Lake Wales Amateur Radio Club has their QRP outing. It is normally at Crystal Lake Park in Lake Wales. This month was no exception. It was a really good turnout as well. 10 of my fellow hams showed up and we had 6 radios set up.

One of the goals of the monthly outing is to test new set ups you may have and this month I had one. I bought a SpiderBeam 12m (40′) push up pole. I’ve had an end fed half wave antenna for quite some time now but have not been able to use it since at the State Parks and other places I go you are not allowed to use the trees for supports. This gave me the opportunity to test my new set up.

My drive on mount consists of a 3 foot 2×12 with a floor flange and 1″ pipe, 3 feet long. I used hose clamps to mount the SpiderBeam to the pole and a bent piece of stiff wire to hold the antenna end. Instead of driving on the board I put it under a picnic table, pushed up the pole, and it worked great! I made 15 CW contacts, most of them DX on 15 meters. Since the CQ WW contest was going on, that helped quite a bit.

I can use this set-up at the State Parks and not worry about having to tie the antenna to anything. Also, if I have continued success I may sell my Buddipole system since I won’t be using it anymore. I prefer the EFHW antenna and it performs much better. I do not need a tuner on 10/20/40 meters and the KX3’s internal tuner matched the wire on 15 and 30 meters. Best part, I didn’t have to drop and raise the antenna to make band adjustments!

AE4RM Station during 2017 CQ WW

Also, since it was CQ WW weekend, I set a goal of 100 contacts. I’m not a big contester and I only operate an hour of so at a time so 100 contacts on a weekend is a lot for me. Especially since I am operating on the KX3 (I did go up to 10 watts). I also used a new logging program, Skookum Logger. It is for the Mac and worked great. It may not have all the bells and whistles of N1MM+ but I would say it is very comparable to N3FJP’s logging program. I’m still learning it but it has a lot of great features and interfaced with the KX3 and my WinKeyer with no issues at all.

Overall, it was a good ham radio weekend.