Category: Uncategorized

Rag Chew

Rag Chew

In ham radio a long conversation is called a rag chew. I’ve had my 3 first real rag chews on CW this week. Each one lasted 20+ minutes and I was able to copy the code fine. In fact, I had a harder time sending the code then copying for some reason. Probably because I was going “off-script.” I usually have a little script I follow for each contact and I was sending just what came to mind including weather, radio and antenna type and family info. It was a blast!

Its a great start to the week because tonight is the unofficial start of CW Ops class. We have a shakedown tonight to make sure our Skype works, mics and headsets work, and of course, we have out keys set up right. I’m looking forward to this as I really like CW and would like to send and receive at 15 words a minute.

The streak is now at 15 days!

Its Been A While

Its Been A While

It’s been a few days since I updated my blog and QSO count. My DX streak did end early. Conditions Thursday were just awful. I was able to keep my QRP QSO streak going!

I just had my longest and best QSO on CW. Thank you to Mike, K1OV, who was very patient and sent slowly. I have two notebook pages of copy from our QSO! We went for almost 30 mins. That is a long QSO for me, especially using CW. My sending was actually worse than my copy tonight. I was able to copy his code quite well but my fist just wasn’t there tonight. I think it might be because I’m switching between the keyed and the bug.

Overall, I’m happy with my CW progress. Monday we start CW Ops training. that is 8 weeks of “intense” CW training where we meet 2 times a week via Skype with an instructor. Wish me luck.

Thanks for reading and 73!

New Hosting Company

New Hosting Company

I changed the host for my blog today. What a pain in the behind that was! I did it because I was hosting at but they really hamstring you on what you can use on your site and they want $$$ if you want to add anything.

So, you may see some changing themes to the site and layouts as I experiment with the new site.

A Radio, an Antenna, and a Mac

A Radio, an Antenna, and a Mac

It has been a busy week, but I’ve spent little time on the air. Last week I had to send the venerable KX3 back to Elecraft for warranty repair. It was transmitting on its own when it got warm, especially when operating outdoors in the heat. I waited until I could squire a backup radio before I sent it in.


I was able to pick up an Elecraft K2 at a very good price. I got it last week and sent the KX3 in. A week later I’m still waiting to hear about the radio. Meanwhile, I’m really liking the K2. It’s an older radio but works great. It has an antenna tune, the SSB module, and KIO2 (serial port). I’ve had fun with it and it makes a great backup and being a field radio, I’ll pack it on long park runs as a backup as well (so I don’t have the same issue I did when the KX3 starting going south on me and I lost contacts).

I was also able to pick up a Cushcraft R9 antenna that is a year old for under half the img_2203price of a new one. It is a 9-band vertical antenna. It’s 31′ high and requires no ground radials. It took me 3 days of working on it off and on, the humidity was a killer, and 2 trips to Crowder Bros. Ace Hardware to get some missing hardware. I love Crowder Bros! I went there with the parts list from the antenna with the missing pieces highlighted and the salesperson went and got every piece for me.

Sara and I were able to mount it on a 10′ pole I had cemented into the ground for an old project. It is almost perfectly tuned on all bands except 40 and 80 meters. That means it is going to have to come down for me to make the adjustments. Hopefully I get it right the first time. I’d hate to have to take it down twice.

I also got tired of Windows again and moved my logging and control back to the Macbook. I tried RumlogNG but it did not print QSL labels properly and developer was no help. I tried Aether but it did not have DX cluster support. I ended up biting the bullet and buying MacloggerDX and so far I have not been sorry. It integrates with the KX3 and K2, has multiple cluster support, and not only prints QSL labels but prints the actual QSL cards as well!

I’ve been able to get Fldigi, WSJT-X, and JT-Bridge all to work together nicely with MacloggerDX as well. My Macbook is a 2009 vintage and all is good. I also have TeamViewer set up so I can attach to the Mac from any other computer and my iPhone.

Overall its been a good week.

Setting Up the KX3 to work with Fldigi and Windows 10 (Part 2)

Setting Up the KX3 to work with Fldigi and Windows 10 (Part 2)

Follow my blog with Bloglovin

Welcome Back! Did you get your hardware all set up? Great. Now, lets get to Fldigi and set it up to work with our KX3.

Go ahead and open Fldigi. The first thing we are going to do is set up Rig Control. Click on Configure – Rig Control.

Once there, click on the Hamlib tab. Be sure to check the Use Hamlib check box. Then choose Elecraft K3/KX3 (Beta) for rig. For device use the Com port you discoved your KX3 was using in Part 1. In my case it is Com 5. The rest of my settings are:
Retries – 3


Retry Interval – 600
Write delay – 0
Post write delay – 100

Baud rate – 38400 (that is default for the KX3)
Stopbits – 1
Polling Interval- 250
Mode Delay 200
Sideband – Rig Mode

Then check the following two boxes:
PTT via Hamlib command
Audio on Auxiliary Port

Once you have all that click on Initialize. Once you have done that you should see the frequency readout in Fldigi change to what is on your KX3. If it did not change confirm all your setting, especially the device (com port).

Save the configuration then close.

Now lets configure the sound card. Click on Configure – Soundcard.

SC.Once there click on the Devices tab. Click the Port Audio box. The capture device should be the microphone we identified in Part 1 and the Playback should be the speaker/headphone jack we identified in Part 1 as well. I’ve left all the other setting at default.

Now, lets test it. Click on the little phone book (Open List). I like to use 14070 most of the time but depending on band conditions you may need to use a different band. So click on 14070 and the KX3 frequency should change to 14070.

If the mode on your radio is not Data, go ahead and press the Data button. Alternatively you can chose PKTUSB from the drop down menu on the left under the frequency. Tweak your volume until you can see some signals and decodes on the left.

Congratulations. You have set up Fldigi to work with your KX3.

If you have any issues, feel free to contact me. I’m good on QRZ.

Setting up the KX3 hardware to work with Fldigi using Windows 10 (Part 1)

Setting up the KX3 hardware to work with Fldigi using Windows 10 (Part 1)

Fldigi-WaterfallLike many of you I wanted to try digital mode with my KX3. The most popular application being Fldigi. Even with my 25 years plus in the IT industry working with various software application, networking and industrial controls I still had quite a bit of problems setting up the radio to work with Fldigi. A recent FaceBook post by a fellow KX3 user who had the same issues I did showed me I was not the only one who had struggles setting this up. Even with a great guide by a fellow ham, K4MTX (see his blog post here), he had the same struggles I did. For that reason, I thought I would put document the steps I took in setting my KX3 up with Fldigi.

MicThe first thing is the cabling. First, I highly recommend you get the cable kit from Elecraft. It may be a little more money, but well worth it. Before even trying to cable up your KX3 to your computer/sound card
you need do the following. First, locate the headphone/speaker jack and microphone jack on your computer/sound card. This may sound very rudimentary but believe me, its easy to get them mixed up. Next, right click on the speaker icon on the system tray and click on recording devices. You may notice multiple recording devices/microphones. This is what tripped me up. Determine which one is your microphone jack. On most computers when you double click the microphone it will be the one that shows “jack information such as “right panel 3.5 mm jack.” To make mine stand out and easy to find, I renamed it Microphone Jack.

Now, again, before you cable anything up you need to turn off the mic bias and mic button. To do this hold down the DISP button and the display should change to the configuration menus. Next, turn the OFS/VFO B knob until the menu changes to MICBIAS. Then use the VFO A know to change the setting to OFF. Then, using the OFS/VFO B knob change the menu to MIC BTN. If using the Elecraft MH3 this should be set to Ptt UP.dn. Use the VFO A knob to change this to OFF. Push the display button to save. If you do not do this you will start transmitting as soon as you plug in the cable to the mic port.

Since I switch over from SSB/CW to digital often I wrote macros to do this for me. You can assign them to the PF1 and PF2 buttons, use the KX3 Utility, or, like I do have them assigned to macros buttons in Win4k3. To go to digital mode i use the following:

To go back to mic mode I use:

Macro programming is outside the scope of this post, but its something you should look into. It can make repetitive tasks much easier.

OK, we can now cable it all up. The cables from Elecraft and marked with a green band and red band. I used the green band to go from the mic jack on the KX3 to the headphone jack of the computer. I then used the red cable to go from the speaker of the KX3 to the mic jack of the computer.

We also need to hook up the CAT control cable. Put the 3.5 mm end into the spot DMmarked ACC1 and the USB side into an open port on your computer. Right click on the Windows start icon and chose device manager. Open up ports. If this is the only serial/USB device you have it will be the only one listed here. If you have multiple, unplug the KX3 from the computer and see which on disappears. That will be the Com port of your KX3.

The final step on the KX3 is to put it into DATA A mode. Do this by press the DATA button and then use the OFS/VFO B know to choose DATA A. This is very important. Make sure the filter on the KX3 is set wide open. I have my BW set at 3.0. IF you have it to narrow, you will not receive any data.

This setup should work with most digital modes.

We will go over setting up Fldigi for the KX3 on my next post.

Parks on the Air

Parks on the Air

IMG_1881One of my new passions is Parks on the Air (POTA). I didn’t get a chance to participate in the ARRL’s National Parks on the Air (NPOTA). I found out about Parks on the Air on Cale Nelson’s Ham Radio 360.

Parks on the Air is part of the World Wide Flora & Fauna. The US parks fall under KFF-WWFF. There are currently over 4,000 sites that can be activated in the US.

My first site I activated was in North Carolina when I visited my daughter, Toni. That gave me the bug and now I’d like to activate more. Last week I activated KFF-1829 – Alafia River State Park. There are 10 parks within an hour drive of my house and I hope to activate most of them this year.

The other great thing about Parks on the Air is the family can come with. We had a great time on the mountain in NC.IMG_1869

The equipment I use for my activations is:
7ah SLA Battery (optional)
American Morse KK1B Strait Key
LNR 10/20/40 Trail-Friendly antenna or
BuddiPole Antenna

All except the BuddiPole fits into a padded camera backpack to make it very compact.

AE4RM’s Blog

AE4RM’s Blog

This is my home station, most of which doubles as my portable station. If consists of an Elecraft KX3, laptop for logging and digital modes, Yeasu FTM-3200D, MFJ power supply, and MFJ antenna tuner. Home antennas consist of an Alpha-Delta DX-CC and a homemade J-pole for 2 meters and 70 cm on a 30 foot home made tiltable mast (so it can come down during a hurricane). The ball is for Samantha, my German Shepherd Dog who is usually right next to me when I’m on the radio.

My station may be small and I can only run 15 watts max at this point but I have confirmed 111 countries confirmed on LoTW, 103 on phone and 53 on CW.

When I am not operating at home I can now be found doing my new favorite thing – Parks on the Air. But more on that in a different post.

I do operate mainly CW now. I use a Lionel J-36 bug (slowed down with additional weights), a Navy flameproof, and an American Morse KK1B strait key. I also enjoy SSB and work the digital modes – JT65, PSK31, and Winlink RMS Express.

I am a member of the following:
SKCC – 15542T
FISTS – 17946
NAQCC – 8477
Flying Pigs – 3783
QCWA – 37324
OMISS – 10396
YLSSB – 17145
SkyWarn – POL-914

I am a member of the Lake Wales Radio Amateurs and participate regularly in their monthly QRP day. I also am member of the Lakeland Amateur Radio Club and am active on their repeater.

I originally started this on blogspot but when I found out they did not have a iPhone app, I moved to WordPress.